GasBuddy Display

Using the same compact hardware as the G32 Grill Display Mini, you now have the option to use an OW GasBuddy standalone – without the need to connect it to a G32. Home Assistant integration is also built in. If you want to track the weight of more than a single gas bottle, this might be of interest for you.

The scale usually reports through the grill. This display reads the weight over a serial lead plugged straight into the GasBuddy, so a second bottle, a spare, or a grill that is out of action still has a readout. The link stays between the scale and the display.

The screen shows the gas weight. Low gas and a low battery flash on the display. With the optional buzzer fitted, the tone repeats every 5 seconds while either value stays under its limit. A new bottle is calibrated on the device itself: the status bar opens a details page, and the wizard runs from there.

The board is the same Waveshare ESP32-C6 and 1.47 inch panel as the Grill Display Mini, plus the plug for the scale and a regulator that powers it. The GasBuddy draws about 145 mW on its own, so the battery wants to be a good deal larger than the cell in the grill display. Color schemes and a charge indicator are included. Firmware is on GitHub, ready to patch and flash from the browser.

Instructions and source on GitHub

Back to Software