G32 Grill Display

DIY project to connect to and monitor an Otto Wilde G32 Connected gas grill.

A handheld stand-in for the official Otto Wilde app. The display connects to the grill over Bluetooth LE and reads temperatures, gas level and status straight from the device. Home Assistant can take those same readings onto a dashboard. The screen is just as useful when it stays on its own.

G32 Grill Display

Up to four grill zones and four external probes update live. With a GasBuddy scale on the grill, the gas level shares that view. Tap a gauge to set a temperature alarm, tap the clock to start a countdown, and tap the title to open settings. Alarms show on the display, and a small buzzer or speaker can sound when a limit or the timer is reached. The status row covers Bluetooth, Wi-Fi, an open lid, the grill light and the charge of an optional battery. Several color schemes are built in, and more are easy to add.

A MEATER probe can take the place of the G32 probes and show tip temperature together with its own battery level. The MEATER 2 Plus is not covered yet. The board is a JC3248W535C, an ESP32-S3 with a 3.5 inch 480x320 touchscreen. A printed case holds a small LiPo and can hang on the handles of the Otto Wilde modules.

GitHub releases include firmware you patch with your Wi-Fi details and then flash from the browser. The Bluetooth link is tested with grill firmware v1.4.5. Older factory firmware such as v13 speaks a different protocol. There is also a much smaller sibling for when the large screen is more than you want to carry.

Instructions and source on GitHub

Back to Software